Friday, 09 December 2022

Hydraulic nailing machine ALL-IN-1 (ALL-IN-1)

ALL IN 1 is an innovative hydraulic nailing machine, which is able to simultaneously carry out the nailing of the upper part and the lower part of the wood pallet using a double bar.

The advantages of the ALL IN 1 Hydraulic nailing machine

The main advantages of using an ALL IN 1 Hydraulic nailing machina are:

  • The clamps are designed to ensure the perfect nailing of the lower part without the risk of a nail jam.
  • The machine is designed to produce multiple types of pallet with a quick change of the jigs.
  • The minimum working dimensions are in width 600 mm. and  in length 600 mm. and the maximum working   dimensions are in width  1200 mm. and in length  1600 mm.
  • The advancement of the pallet is made by a continuos moving chariot complete with jigs
  • The structure is made of high mechanical strength steel tubular.
  • Fast and easy adjustment are the peculiarities and characteristics of the ALL IN 1.
  • With the simultaneous nailing you will prevent the movements of the various elements that compones   the pallet.
  • An automatic clamp will onload the pallet in the right position  on the pallets finishing line.

The hydraulic system is equipped with a heat exchanger that keeps the oil in the hydraulic circuit at a constant temperature, allowing a tough and hard use of the machine, without causing damage to the hydraulic circuit.



You can share this on the main social network.


Stamping machine (TIM 4/6)

Using the thermic stamping machine the operator can brand the pallets. Equipped with 4 or 6 customizable branding heads in bronze.

Angle cutting machine (TGAN)

This auxiliary equipment allows the machine to smoothen the angles of the pallet by means of a cutting sequence at an angle of 45°.

Pallet Tilter of 90° (GP90)

Auxiliary machinery in tubular steel structure which allows the machine to rotate the pallets by 90°to prepare them for the following processing operations and to ensure proper stacking.

Vicetype pallet tilter (GPIN)

The machine allows the operator to tilt the pallet on itself through a piece of equipment that incorporates a vice run by pneumatic cylinders.

Alternating pallet tilter (GPT)

By means of a tilter with rotary belt and steel structure, the pallet is rotated by 180°. It is also configured to perform the transfert function.

Milling machine with 6 cutters from the top (SMTA)

Chamfering unit for in-line deck boards in tubular structure with cutting depth adjuster. Equipped with 6 cutters from the top (for CHT).

Milling machine 6 heads from the bottom (SMTB)

Chamfering unit for in-line deck boards with tubular steel structure and cutting depth adjuster. Equipped with six cutter from the bottom (for CHA).

Automatic blocks feeder (CAT)

Automatic feeder that allows the machine to load blocks that are already cut in the nailing machine without the need for the operator to intervene.

Double tweezers (DP)

An optional equipment of the block-cutting machine that allows the operator to double the productive capacity while maintaining cutting precision and speed.


Lateral transfert (TLT)

Accessory that enables the automated lateral movement of the pallets by means of an alignment barrier.

Motorized Belt Conveyor (MAG6)

The terminal part of the stacking unit, the warehouse allows the operator to unload the processed pallets. It is equipped with a photocell to the stop the machine when the warehouse is full.

Automatic unloading device (DD500)

Assembled on a mobile counter, thanks to a pneumatic cylinder, the device adjusts the automatic scrapping of the head and tail of the joist.


Contact us for more information about our products!